Wind Turbine Curing Blankets

For Rotor Blade In Wind Turbines

Wind turbine blades, engineered from advanced composite materials like carbon fiber and epoxy prepregs, sustain damage from erosion, impacts, or environmental wear during operational life. Efficient field repair is essential to restore blade integrity and minimize turbine downtime. At OTA Fiberglass, our wind turbine curing blankets are built to deliver precise, uniform thermal profiles across blade surfaces, accelerating composite curing and enhancing repair quality. Hardening the epoxy and repair safely and evenly on the wind turbine rotor blade.

OTA Fiberglass manufactures various heating solutions across many industries powered by TB Future T30 Smart Temperature Controllers.  OTA Fiberglass Heating Blankets applications such as composite laminates heating in prepreg, vacuum infusion lamination and wet layup of carbon and epoxy, ensuring an even temperature distribution across the surface of the material. See custom built solutions for heating and curing in repair/construction in the aerospace, shipbuilding and the wind turbine manufacturing industry.

Each curing blanket is constructed from high-grade silicone-coated fiberglass, featuring dense thermal insulation. Their flexibility allows them to adjust tightly to curved blade tips or repair patches for ensuring even heat across contoured surfaces without causing uneven stress.

Designed for Wind Blade Precision 

Our curing blankets are available in different dimensions and wattage ratings to suit small tip repairs or large field patches. Typical setpoints range from 60°C to 80°C, matching optimal epoxy curing temperatures. The silicone-treated surfaces resist moisture and flex damage, while the fiberglass layers usually 7 mm thick preserve thermal efficiency and minimize heat loss in cold ambient conditions. For inquiries about Epoxy curing heating blankets or T30 Temperature Controller by TB Future, ask us using chat feature or contact us here.

The curing blankets may be linked together or installed individually, depending on repair geometry. Rapid installation, conformal fit, and consistent coverage make them ideally suited for on‑turbine field repairs, where mobility, speed, and safety matter most. 

Smart Temperature Control with TB Future T30 

Integral to our curing system is the TB Future T30 smart temperature controller, which brings advanced heat management to every repair operation. Connected via NTC-3950 sensors embedded in each heating blanket element, the T30 allows for accurate temperature tracking, programmable ramp-up, and automatic hold cycles. This ensures epoxy cures at the correct rate, reducing risk of bubbling, discoloration, or structural weakness. 

With the T30’s over-temperature alarm function and ramp up heat on turn on, repair crews can pre-set curing protocols and monitor results without constant oversight. Safety features like over temperature shutdown and IP54 rated housing make the controller suitable for varied on‑site environments. 

 

Levels of Temperature Control

Multiple controllers connectable to a single Heating Element/Product, with one, two or three sensors possible per controller or a combination of the two solutions for full control in custom applications. For instance below TB Future T30 is a 2 Sensor 2 Screens version that is useful in various industrial applications. Find out why you may need the T30 2 sensor smart temperature controller here.

 

 

Benefits for Field Repair Teams 

Heating blankets dramatically reduce cure time compared to ambient conditions delivering evenly distributed heat that reduces thermal variation and improves bond strength. Field technicians benefit from lightweight, flexible blankets that can be easily transported and secured around blade contours, even while suspended. 

Consistent with professional repair benchmarks, OTA Fiberglass systems deliver performance driven design elements: 

• Heat distribution uniformity across curved blade surfaces. 

• Flexible wrap around leading and trailing edges. 

• Modular cascading of blankets to cover large or odd shapes. 

• Controlled cure cycles that maximize repair quality while minimizing energy use. 

Choose OTA Fiberglass for Curing Excellence 

Wind turbine maintenance teams demand interrupt-free operation and long-lasting repairs. OTA Fiberglass curing blankets simplify thermal control without compromising safety or product integrity. With the right heating solution -custom built for a specificific industrial curing application and powered by TB Future T30. Our full system encourages repeatable, efficient blade repairs, minimizing turbine downtime and maximizing repair confidence. 

Explore our curing solution, and see our curing blankets in action via our YouTube channel: OTA Fiberglass on YouTube. 

Need Help Designing a Custom Blanket?

Whether you are dealing with complex blade geometries or remote repair sites, we can customize blanket shape, wattage, and control settings to suit your needs. Our engineering support ensures that every system meets both your repair standard and temperature control requirements. 

 

 

 

 

OTA Fiberglass Heating Solutions

Learn More About Us